Hardness Tester

Insize TEST STAND FOR DIGITAL SHORE DUROMETER (ISH-DS-STANDA)

• For digital shore durometers (code ISH-DSA and ISH-DSD)
• Can perform repeatable hardness measurement due to fewer possibilities of human error or measurement variations
• Special structure for stable loading
• Weight block A is for ISH-DSA, weight block D is for ISH-DSD

Hardness scale:

- With standard indenters: HRA, HRB, HRC, HRD, HRF, HRG

- With optional indenters: HRE, HRH, HRK, HRL, HRM, HRP, HRR, HRS, HRV

Preliminary test force: 98N (10kgf)

Total test force: 588N (60kg); 980N(100kg); 1471N(150kg)

Conversion scale:  HR, HK, HB, HV

Stage elevation: manual

Load control: high speed close-loop system automatic loading (load/dwell/unload)

Load dwell time: 0~99 sec

Resolution: 0.1HR

Data output: built-in printer, RS232

Max. workpiece height: 260mm

Max. workpiece depth: 150mm (from the center of indenter to the main body)

Power supply: 110/220V, 50/60Hz

Dimension: 700x260x700mm

Weight: 85kg

Standard delivery:

- Main unit: 1pc

- Φ60mm flat anvil: 1pc

- Φ150mm flat anvil: 1pc

- V-type anvil: 1pc

- Diamond indenter: 1pc

- Φ1.5875mm carbide ball indenter: 1pc

- Hardness test block HRB88~95: 1pc

- Hardness test block HRC20~30: 1pc

- Hardness test block HRC40~50: 1pc

- Hardness test block HRC60~65: 1pc

Optional accessory:

- Hardness test block HRB88~95

- Hardness test block HRC20~30

- Hardness test block HRC40~50

- Hardness test block HRC60~65

- Hardness test block 78~88HR15N

- Hardness test block 55~73HR30N

- Hardness test block 57~69HR30T

- Small V type anvil

- Connection cable and software

• Apply to large steel or iron workpieces
• According to ISO 6508, ASTM E18

• metal housing
• hd tft 320x 320 display
• impact device d
• based on leeb (hld), converted to vickers (hv), brinell (hb), rockwell (hrc, hra, and hrb), shore (hs), and tensile strength (sgm)
• four display modes
• automatic direction correction 
• tolerance testing
• automatic power off, automatic calculation of statistics 
• connected with printer via bluetooth
• connected to pc software via usb or bluetooth 2. 0
• dual value display, show both leeb & other conversion value
• 31 files can be saved, each containing 100 measurement data
• operating temperature: -20°c~70°c
• according to astm a956 , din 50156, gb/t  17394
• inspection certificate 

• Can change probes
• Dual-coil probe for high accuracy
• Universal testing angle, no need to set impact direction
• Based on Leeb (HLD), converted to Vickers (HV), Brinell (HB), Rockwell (HRC, HRA and HRB), Shore (HS) and tensile strength (SGM)
• Dual value display, shows both Leeb and converted hardness
• Large LCD display with backlight
• Can choose large font display and statistics display
• Automatically calculate maximum, minimum and average value
• Save 300 data
• Operating temperature: -10°C-’45°C
• According to ASTM A956, DIN 50156, GB/T 17394

The Insize - 10 to 90 HA Shore Durometer is a device used to measure the hardness of a material. The hardness of materials such as polymers, elastomers, rubbers can be measured with this device. The 10 to 90 HA Shore Durometer has a digital display that displays the hardness of the materials. The higher number on the scale denotes a higher resistance to indentation. Therefore, a higher value of hardness means the material is hard. Lower numbers on the scale denote lower resistance and softer materials. The shore durometer is made up of high-quality material to ensure the precision and accuracy of the device. Its accuracy in measuring the hardness makes the device one of the finest durometers in the market.

Product Descriptions:

Brand: Insize

Model No: ISH-SAM

Product: Shore Durometer

Measurement Range: 10-90HA

Standards: ISO868, ISO7619

Weight: 257 g

Applications: Nature rubber, soft elastomer, etc

Graduation: 1 HA

Key Features:

Accuracy